Call: 888.622.2034  Request a Quote
  Email
  2. Industrial Blowers
  3. APPL REGENERATIVE BLOWERS SINGLE STAGE MODELS
  4. MODEL DG430

About Air Power Products

Products and Services

MODEL DG430

CONSTRUCTION FEATURES

  • Fine grain cast aluminum impeller and casings for maximum heat dissipation
  • C-UL-US registered for service in Canada and the USA
  • IP-55 rated (TEFC) motors
  • Mountable in either horizontal or vertical positions
  • Inlet and outlet silencers for quiet operation
  • 2” F. NPT connection size

Printable Page

Downloads

Request Information

ELECTRICAL SPECIFICATIONS AND CAPACITIES

MODEL
NUMBER		 PH HZ VOLTAGE RATED kW MAX AMPS * MAX. PRES
INCHES W.C.		 * MAX VAC
INCHES W.C.		 MAX FLOW CFM WT. LBS NOISE LEVEL
dBA

DG430-16TS

3

50
60

200-240/345-415
220-275/380-480

3.4
3.7

12.5/7.2
13.5/7.8

164
140

138
149

130
155

88

74
77

DG430-17TS

3

60

575

3.7

5.3

140

149

155

88

77

DG430-26TS

3

50
60

200-240/345-415
220-275/380-480

4.0
4.6

14.3/8.2
16.2/9.3

184
190

142
165

130
155

95

74
77
DG430-27TS
3
60
575
4.6
5.9
190
165

155
95
77

*Maximum operating pressure and vacuum levels are based on optimum supply voltage. Low (of high) voltage supply may reduce the achievable pressure/vacuum levels while remaining within nameplate amperage limitations.
NOTE: "TS" suffix in the model numbers designates a winding embedded thermistor switch is included for pilot duty service for protection of the blower from over-temperature. This is added protection, and motor overload protection is still required in the magnetic motor starter or VFD.