Call: 888.622.2034  Request a Quote
  Email
  2. Industrial Blowers
  3. APPL REGENERATIVE BLOWERS SINGLE STAGE MODELS
  4. MODEL DG330

About Air Power Products

Products and Services

MODEL DG330

CONSTRUCTION FEATURES

  • Fine grain cast aluminum impeller and casings for maximum heat dissipation
  • C-UL-US registered for service in Canada and the USA
  • IP-55 rated (TEFC) motors
  • Mountable in either horizontal or vertical positions
  • Inlet and outlet silencers for quiet operation
  • 1-1/2” F. NPT connection size

Printable Page

Downloads

Request Information

ELECTRICAL SPECIFICATIONS AND CAPACITIES

MODEL
NUMBER		 PH HZ VOLTAGE RATED kW MAX AMPS * MAX. PRES
INCHES W.C.		 * MAX VAC
INCHES W.C.		 MAX FLOW CFM WT. LBS NOISE LEVEL
dBA

DG330-11TS

1
1

50
60

100-120/200-240
220-120/220-240

1.5
1.75

20/10
22.8/11.4

100
104

96
100

92
110

63

66
69

DG330-16TS

3
3

50
60

200-240/345-415
220-275/380-480

1.75
1.9

6.7/3.9
7/4

120
120

110
110

92
110

55

66
69

DG330-17TS

3

60

575

1.9

3.1

120

110

110

55

69
DG330-26TS
3
50
60
200-240/345-415
220-275/380-480
2.2
2.6
7.8/4.5
9.5/5.5
156
168
128
140

92
110
62
66
69
DG330-27TS
3
60
575
2.6
3.6
168
140

110
62
69

*Maximum operating pressure and vacuum levels are based on optimum supply voltage. Low (or high) voltage supply may reduce the achievable pressure/vacuum levels while remaining within nameplate amperage limitations.
NOTE: "TS" suffix in the model numbers designates a winding embedded thermistor switch is included for pilot duty service for protection of the blower from over-temperature. This is added protection, and motor overload protection is still required in the magnetic motor starter or VFD.