Call: 888.622.2034  Request a Quote
  Email
  2. Industrial Blowers
  3. APPL REGENERATIVE BLOWERS SINGLE STAGE MODELS
  4. MODEL DG-230

About Air Power Products

Products and Services

MODEL DG-230

CONSTRUCTION FEATURES

  • Fine grain cast aluminum impeller and casings for maximum heat dissipation
  • C-UL-US registered for service in Canada and the USA
  • IP-55 rated (TEFC) motors with winding embedded thermistor switch (TS)
  • Mountable in either horizontal or vertical positions
  • Inlet and outlet silencers for quiet operation

Printable Page

Downloads

Request Information

ELECTRICAL SPECIFICATIONS AND CAPACITIES

MODEL
NUMBER		 PH HZ VOLTAGE RATED kW MAX AMPS * MAX. PRES
INCHES W.C.		 * MAX VAC
INCHES W.C.		 MAX FLOW CFM WT. LBS NOISE LEVEL

DG230-11TS

1
1

50
60

100-120/200-240
220-120/220-240

.75
.85

9.2/4.5
22.8/11.4

88
88

72
80

56.5
63.5

38.5

60
66

DG230-16TS

3
3

50
60

200-240/345-415
220-275/380-480

.75
.85

3.7/2.14
3.9/2.25

96
98

80
98

56.5
63.5

37.4

60
67

DG230-17TS

3

60

575

.85

1.6

98

98

63.5

37.4

67

*Maximum operating pressure and vacuum levels are based on optimum supply voltage. Low (or high) voltage supply may reduce the achievable pressure/vacuum levels while remaining within nameplate amperage limitations.
NOTE: "TS" suffix in the model numbers designates a winding embedded thermistor switch is included for pilot duty service for protection of the blower from over-temperature. This is added protection, and motor overload protection is still required in the magnetic motor starter or VFD.